TTM NoXygen® C650 Degasser
Removes harmful gases in hydronic system
TTM NoXygen® C650 is a fully automatic vacuum degasser for heating and cooling systems. Energy losses, corrosion and sound problems in the systems are mainly caused by a high gasconcentration in the system fluid. TTM NoXygen® C650 prevents above stated problems by using an effective method that keeps the system free of gases that gives higher energy efficiency, lower maintenance cost and longer lifetime of the system components. TTM NoXygen® can be installed in both existing and new systems. TTM NoXygen® is environmentally assessed according to a Swedish Standard.
Art. no: 509554
• Increases energy efficiency in cooling/heating systems
• Easy to install and commissioning
• Decreases sound problems in pipe systems
• Prevents degradation of heat transfer fluids in cooling system
• Stable and easy adjustment of cooling/heating systems
• Prevents corrosion of system components
• Prepared for connection to an external monitoring system.
|System pressure standard, total pressure at the connection point, max.||+0.8 – +5.0 bar|
|Media temperature:||0 – +70 °C|
|Ambient temperature:||0 – +40 °C|
|Capacity, degassed fluid||min. 135 l/h|
|Vacuum capacity during degassing:||-0.7 – -0.9|
|Pressure class:||PN 10|
|Water + glycol:||Addition of antifreeze agent up to 30%|
|Addition of antifreeze:||agent up to 30%|
|Connection dimension||DN15 – G1/2”|
|External fuse||10 A|
|Nominal power||0.75 kW|
|Voltage||~230 V, 50 Hz|
|Nominal current||5 A|
|Class of protection||IP44|
|Noise Level||61 dB|
TTM NoXygen® takes out and treats a partial stream that is pumped from the main fluid conduit and processed with a strong underpressure in the NoXygen unit between -0.7 and -0.9 bars. The gases are released by the pressure reduction and are led out through a gas-release valve. The fluid is then returned to the main conduit.
TTM NoXygen® is very easy to install, commission and operate. Operation is monitored by a control unit where 2 pushes of a button is enough to start the operating mode.
TTM NoXygen® starts in manual operation and after 30 days it automatically switch to a timer mode.
There is an option to select manual operation between 1-30 days before. TTM NoXygen® switches over to timer operation. Time operation can be selected using three different starting times: 9:00 am, 1:00 pm or 7:00 pm. In most cases, one hour of operation per day is fully sufficient to keep the gas concentration in the fluid at a low level. Timer operation can be chosen for operating times of 1-8 hours.